Real Fyre EPK-2V-TR 110-Volt Powered Electronic Non-Standing Pilot System

110 V Powered Electronic, non-standing pilot system designed to be installed outside the firebox. Includes Adaptor Plug & Mounting Bracket.

The EPK-2V-TR is a 110-volt powered electronic gas control valve from RH Peterson Real Fyre. It features a non-standing pilot system designed for installation outside your firebox. This remote controlled fireplace gas valve control kit will shut down when the unit is turned off. The transmitter allows for on/off operation, convenient flame height adjustment, and a timer mode, and it communicates with a receiver that is built into the module.

Designed only for the vented Real Fyre burners listed in the specs below. Compatible with natural gas to deliver 120,000 BTUs or propane for an output of 180,000 BTUs. Adapter plug and mounting brackets are included.

Note: For use only with specified Real Fyre vented burner systems. Vented burners must be used in a fireplace that is vented from the firebox through the chimney. The fireplace damper must be kept open during use to allow for appropriate airflow. For your safety, the burner pan and valve must be assembled by a certified gas professional.

Features

• Ignition: Electronic
• Operation: Manual Switch | Remote Control
• AT-12V-1 Remote: On/Off Operation | Hi/Lo Flame Adjustment | Timer Mode
• Pilot: Non-Standing Intermittent Pilot
• Flame Control: Variable Flame Height
• Fuel: Natural Gas | Liquid Propane
• BTU Volume: Standard Capacity
• BTUs: 120,000 NG | 180,000 LP
• Certification: CSA Certified
• Included Features: 110 AC Transformer | Built-in Receiver | Mounting Bracket
• Recommended Real Fyre Vented Burners: G4 | G45 | PB | P45 (12-42" NG | 12-60" LP)
• Recommended Real Fyre See Thru Burners: G45-2 (16/19" to 2-30" NG | 16/19" to 2-60" LP)

EPK-2V-TR Manual