800-963-5724
Great reasons to buy from us:
-
Free Shipping
FREE Shipping on Orders over $299 -
We will beat any price
110% Price Match Guarantee -
Fast Shipping
In Stock Orders Ship in 24-48 hours -
Huge Discounts
Up To 20% Off! Don't miss out on this limited time offer!
The Nectre N65 is beautifully compact, yet powerful enough to heat 150m² of living area.
The sleek design fits beautifully in either a traditional or contemporary living area. With its tested high efficiency and low emission rating, the Nectre N65 is a welcome addition to your living space.
- Finished in black metallic paint
- Steel door with ceramic glass
- Stainless steel handle
- Steel baffle with steel brick retainer
- Vermiculite/firebrick lining to improve thermal mass
FEATURES
- 2 x 6.0mm steel baffle plate
- 6.0mm steel firebox with 8mm radiant top
- Steel firebrick retainer
- Concealed ash-pan
- Approved lower wood storage
- Door aperture: 305 x 380
- Firebox cubic size: 0.043m³
- Weight: 190kg
SPECIFICATION
- Brand: Nectre
- Model: N65
- Install Type: Freestanding
- Efficiency (%): 76
- Clean Air Approved: YES
- Maximum Output (kW): 15
- Width (mm): 345
- Depth (mm): 275
- Height (mm): 450
- Flue Diameter (mm): 150
- Requires Hearth: YES
- ULEB Certified: NO
Venting Optional Accessories
Click to see DuraVent Flat Ceiling with Single Wall Pipe Chimney Kit
| DuraBlack Pipe Telescoping Length With Trim - 6DBK-TL | |
 |
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. |
| DuraTech Round Ceiling Support Box - 6DT-RCS | |
 |
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. |
| DuraTech Chimney Pipe - 6DT-48 | |
 |
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Attic Insulation Shield - 6DT-IS | |
 |
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. |
| DuraTech Roof Flashing - 6DT-F6 | |
 |
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
 |
Required where pipe terminates above the roofline. |
| DuraTech Storm Collar - 5DT-SC | |
 |
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Click to see DuraVent Cathedral Ceiling with Single Wall Pipe Chimney Kit
| DuraBlack Pipe Telescoping Length With Trim - 6DBK-TL | |
|
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. |
| DuraBlack 12" Length Single-Wall Black Pipe - 6DBK-12 | |
 |
Use for a single-wall connector pipe. Requires 18” clearance to combustibles. Subtract 1 1⁄4” from the length to calculate the installed length. |
| DuraTech Chimney Pipe - 6DT-48 and 6DT-24 | |
 |
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech 24" Square Ceiling Support Box - 6DT-CS24 | |
 |
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist lock. Suitable for both flat and cathedral (A-Frame) ceiling applications. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Click to see DuraVent Cathedral Ceiling with Double Wall Pipe Chimney Kit
| DVL Pipe Telescoping Length - 6DVL-68TA | |
 |
Use for a two-piece installation from stove to ceiling support box or finishing collar. |
| DVL Double-Wall Black Pipe - 6DVL-12 | |
 |
Designed for installation with minimum clearance to combustibles (6” to walls, 8” from top of horizontal run to ceiling). |
| DVL Adapter Section No Damper - 6DVL-AD | |
 |
Connects DVL pipe to the appliance flue outlet. Use as a stove adapter. |
| DuraTech Chimney Pipe - 6DT-48 and 6DT-24 | |
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech 24" Square Ceiling Support Box - 6DT-CS24 | |
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist lock. Suitable for both flat and cathedral (A-Frame) ceiling applications. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Click to see DuraVent Flat Ceiling with Double Wall Pipe Chimney Kit
| DVL Pipe Telescoping Length - 6DVL-68TA | |
|
|
Use for a two-piece installation from stove to ceiling support box or finishing collar. |
| DVL Adapter Section No Damper - 6DVL-AD | |
|
|
Connects DVL pipe to the appliance flue outlet. Use as a stove adapter. |
| DuraTech Round Ceiling Support Box - 6DT-RCS | |
|
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. |
| DuraTech Chimney Pipe - 6DT-48 (2x) | |
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech Attic Insulation Shield - 6DT-IS | |
|
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over Firestop Radiation Shield or a support box. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Downloads
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
Description
The Nectre N65 is beautifully compact, yet powerful enough to heat 150m² of living area.
The sleek design fits beautifully in either a traditional or contemporary living area. With its tested high efficiency and low emission rating, the Nectre N65 is a welcome addition to your living space.
- Finished in black metallic paint
- Steel door with ceramic glass
- Stainless steel handle
- Steel baffle with steel brick retainer
- Vermiculite/firebrick lining to improve thermal mass
FEATURES
- 2 x 6.0mm steel baffle plate
- 6.0mm steel firebox with 8mm radiant top
- Steel firebrick retainer
- Concealed ash-pan
- Approved lower wood storage
- Door aperture: 305 x 380
- Firebox cubic size: 0.043m³
- Weight: 190kg
SPECIFICATION
- Brand: Nectre
- Model: N65
- Install Type: Freestanding
- Efficiency (%): 76
- Clean Air Approved: YES
- Maximum Output (kW): 15
- Width (mm): 345
- Depth (mm): 275
- Height (mm): 450
- Flue Diameter (mm): 150
- Requires Hearth: YES
- ULEB Certified: NO
Venting Optional Accessories
Click to see DuraVent Flat Ceiling with Single Wall Pipe Chimney Kit
| DuraBlack Pipe Telescoping Length With Trim - 6DBK-TL | |
|
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. |
| DuraTech Round Ceiling Support Box - 6DT-RCS | |
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. |
| DuraTech Chimney Pipe - 6DT-48 | |
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Attic Insulation Shield - 6DT-IS | |
|
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Click to see DuraVent Cathedral Ceiling with Single Wall Pipe Chimney Kit
| DuraBlack Pipe Telescoping Length With Trim - 6DBK-TL | |
|
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. |
| DuraBlack 12" Length Single-Wall Black Pipe - 6DBK-12 | |
|
|
Use for a single-wall connector pipe. Requires 18” clearance to combustibles. Subtract 1 1⁄4” from the length to calculate the installed length. |
| DuraTech Chimney Pipe - 6DT-48 and 6DT-24 | |
|
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech 24" Square Ceiling Support Box - 6DT-CS24 | |
|
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist lock. Suitable for both flat and cathedral (A-Frame) ceiling applications. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Click to see DuraVent Cathedral Ceiling with Double Wall Pipe Chimney Kit
| DVL Pipe Telescoping Length - 6DVL-68TA | |
|
|
Use for a two-piece installation from stove to ceiling support box or finishing collar. |
| DVL Double-Wall Black Pipe - 6DVL-12 | |
|
|
Designed for installation with minimum clearance to combustibles (6” to walls, 8” from top of horizontal run to ceiling). |
| DVL Adapter Section No Damper - 6DVL-AD | |
|
|
Connects DVL pipe to the appliance flue outlet. Use as a stove adapter. |
| DuraTech Chimney Pipe - 6DT-48 and 6DT-24 | |
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech 24" Square Ceiling Support Box - 6DT-CS24 | |
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist lock. Suitable for both flat and cathedral (A-Frame) ceiling applications. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Click to see DuraVent Flat Ceiling with Double Wall Pipe Chimney Kit
| DVL Pipe Telescoping Length - 6DVL-68TA | |
|
|
Use for a two-piece installation from stove to ceiling support box or finishing collar. |
| DVL Adapter Section No Damper - 6DVL-AD | |
|
|
Connects DVL pipe to the appliance flue outlet. Use as a stove adapter. |
| DuraTech Round Ceiling Support Box - 6DT-RCS | |
|
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. |
| DuraTech Chimney Pipe - 6DT-48 (2x) | |
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech Attic Insulation Shield - 6DT-IS | |
|
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over Firestop Radiation Shield or a support box. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
Downloads
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
Item Added to Your Cart
Add One of These Popular Items
★
No reviews yet. Be the first to review this product!
Frequently Asked Questions
3
visitors right now
3
visitors have this item in their cart right now
3
people have bought this item
3
% of people buy 2 or more