Empire 18" Charred Oak Ceramic Fiber Log Set

Empire Vent-Free Burners are approved for use in any certified vent-free firebox. They may be also installed in an existing wood-burning fireplace, with the damper closed, to operate as a vent-free heating system.

A vent-free Millivolt Loft Burner may also be installed as a decorative appliance in a vented fireplace to provide ambiance and light – but without the heat. In a vented installation, the burner cannot be operated by thermostat, and the flue damper must be blocked open. A damper clamp is included with all Loft burners.

Traditional Vent-Free Log Sets

From the curve of each log to the height of the stack, your Empire complements the burner pattern for a lifelike fire. Complete the illusion with one of our optional Ember Bed Kits and Platinum Glowing Embers.

Your Empire Vent-Free log set creates a consistent, controlled heat – without dangerous flare-ups or chilling die-downs. These gas logs warm your room quickly and efficiently while using about half the energy of a vented gas log.

Vented Slope Glaze Burners

A vented gas log set makes a great alternative to the hassle of building a log fire in your wood-burning fireplace. Just like a wood fire, a vented gas log set provides plenty of mesmerizing flames and flickering light. Vented log sets are considered decorative systems and must be installed in a vented fireplace with the damper open and may not operate by thermostat.

Empire offer two types of Vented Gas Log Systems. Empire Vented Slope Glaze Burners are rated at up to 75,000 Btu to create taller flames. Millivolt Vented Burners may be operated with an on/off remote control or wall switch.

The top of the Slope Glaze burner features precision ports that position the flames to complement the log set. Inside the burner, the gas flows through a bed of precisely sized ceramic pellets that tumble and swirl the gas as it mixes with the air. The result is a cleaner burning fire with natural flame movement – a great choice for LP gas installations.

Vent-Free Slope Glaze Burners

Empire popular Slope Glaze Burners raise the standard for dancing flames. Internal ceramic beads tumble the gas to create an exceptionally realistic flame movement.

A vented/Vent-Free gas log set makes a great alternative to the hassle of building a log fire in your wood-burning fireplace. Just like a wood fire, a vented gas log set provides plenty of mesmerizing flames and flickering light. Vented/Vent-Free log sets are considered decorative systems and must be installed in a vented fireplace.

Includes: 4 Piece Log Set.
*Note: Shown with Burner Kit (Not Included)
*Note: For Charred Oak Ceramic Fiber Log Set Assembly Please refer to the Video section below

Features

• Available in 16", 18", 24" and 30" sizes.
• Overall Dimensions: 18" (L)
• Gas Type: Natural Gas or Liquid Propane
• Four piece log set
• Log sets are hand painted
• Approved for use in any certified vent-free firebox
• Logs Only: Charred Oak
• For use with slope glaze burner system
• Required: Must Choose Burner to Complete Log Set
• Compatible Burners:
  • Vent-Free Intermittent Pilot 18" Slope Glaze Burner with Thermostat Variable Remote Control (VFSE18N) (VFSE18P)
  • Vent-Free Manual with 3-Position (Hi-Med-Low) Knob 18" Slope Glaze Burner with Standing Pilot/Piezo (VFSM18LP) (VFSM18NAT)
  • Vent-Free Millivolt 18" Slope Glaze Burner with Remote Ready and Standing Pilot/Piezo (VFSR18LP) (VFSR18NAT)
  • Vent-Free Variable Flame Height Control 18" Slope Glaze Burner (VFSV18LP) (VFSV18NAT)
  • Vented Millivolt with On/Off Switch 18" Slope Glaze Burner (VSR18LP) (VSR18NAT)
    

CA Residents: See Prop 65 WARNING.

Options & Accessories

Vented Millivolt with On/Off Switch 18" Slope Glaze Burner

The Empire Slope Glaze Burner with logs provides a lovely atmosphere for your family room or den. The Slope Glaze burner creates lifelike flames that accentuate the lifelike look and appeal of the logs. The combined physical features of the logs and flames add to the atmosphere of the fireplace. Includes: Slope Glaze Burner Fittings Embers Flex Line Lava Rock Features: UL Certified Burner Fuel Type: Natural Gas / Propane Ignition Type: Millivolt with On/Off Switch Certified for installation as vented log set ONLY. Can be used with Birch, Charred Oak, or Super Charred Oak Ceramic Fiber Log Sets Can be used with Super Stacked Wildwood, Driftwood Burncrete, Ponderosa, Stacked Aged Oak, Sassafras or Super Sassafras Refractory Log Sets

Vent-Free Manual 18" Slope Glaze Burner with Standing Pilot/Piezo

Special Ceramic Bead materials within the precisely ported burner swirl the flowing gas to produce naturally flickering flames. Glowing embers, included with the burner, add to the illusion of a real wood fire. Vent. All come with piezo ignition and standing pilot. The Variable Remote turns the burner off and on, and lets you vary the flame height to maintain a comfortable room temperature. Model: VFSM18LP / VFSM18NAT Fuel Type: LP or NG Ignition Type: Manual Control with 3-Position (Hi-Med-Low) Knob Vent-Free Systems convert to Vented Systems by opening the Flue Damper VFSV Systems - Flame Height Controlled by Remote Supplied with unit A Vent-Free Burner may be installed in a vented fireplace for use as a decorative appliance. A decorative appliance operates with an on/off switch or remote, and may not operate with a thermostat. BURNER ONLY: Slope Glaze Burner Overall Dimensions: 18" (L) The dimensions shown are minimum clearances to maintain in installing this heater Left and right clearances are determined when facing the front of the heater

Vent-Free Millivolt 18" Slope Glaze Burner with Remote Ready and Standing Pilot/Piezo

Special Ceramic Bead materials within the precisely ported burner swirl the flowing gas to produce naturally flickering flames. Glowing embers, included with the burner, add to the illusion of a real wood fire. Vent. All come with piezo ignition and standing pilot. The Variable Remote turns the burner off and on, and lets you vary the flame height to maintain a comfortable room temperature. Model: VFSR18LP / VFSR18NAT Fuel Type: LP or NG Ignition Type: Millivolt Control Vent-Free Systems convert to Vented Systems by opening the Flue Damper VFSV Systems - Flame Height Controlled by Remote Supplied with unit A Vent-Free Burner may be installed in a vented fireplace for use as a decorative appliance. A decorative appliance operates with an on/off switch or remote, and may not operate with a thermostat. BURNER ONLY: Slope Glaze Burner Overall Dimensions: 18" (L) Minimum Dimensions for Solid Fuel Burning Fireplaces: 28" (Front Width) x 17" (Back Width) x 14" (Depth) x 17" (Height) The dimensions shown are minimum clearances to maintain in installing this heater Left and right clearances are determined when facing the front of the heater

Vent-Free Variable Flame Height Control 18" Slope Glaze Burner

Special Ceramic Bead materials within the precisely ported burner swirl the flowing gas to produce naturally flickering flames. Glowing embers, included with the burner, add to the illusion of a real wood fire. Vent. All come with piezo ignition and standing pilot. The Variable Remote turns the burner off and on, and lets you vary the flame height to maintain a comfortable room temperature. All vent - free burners include an Oxygen Depletion Sensor (ODS) to instantly shut off the system if oxygen in the room drops to unsafe levels. Model:VFSV18LP / VFSV18NAT Fuel Type: LP or NG Ignition Type: Variable frame height Vent-Free Systems convert to Vented Systems by opening the Flue Damper VFSV Systems - Flame Height Controlled by Remote Supplied with unit A Vent-Free Burner may be installed in a vented fireplace for use as a decorative appliance. A decorative appliance operates with an on/off switch or remote, and may not operate with a thermostat. BURNER ONLY: Slope Glaze Burner Overall Dimensions: 18" (L) Minimum Dimensions for Solid Fuel Burning Fireplaces: 28" (Front Width) x 17" (Back Width) x 14" (Depth) x 17" (Height) The dimensions shown are minimum clearances to maintain in installing this heater Left and right clearances are determined when facing the front of the heater

Non-Thermostat, Battery Operated Remote Transmitter (Required for VFSE in Vented Application)

Click to see Non-Thermostat Remote Control Transmitter for IP Burners

• Model: FRIP
• Battery Operated Transmitter
• Non-Thermostat Remote Control Transmitter
• For use with Harmony and White Mountain Hearth Slope Glaze Intermittent Pilot Burners

Click to see Control Options (For Millivolt Only)

Note: The Variable Flame and Intermittent Pilot (IP) both come with a remote. For Millivolt, choose one of these options

	FRBC Battery Operated On or Off Remote Control Turn burner OFF and ON using two-button handheld remote (Adjust flame from low to high using knob on the valve) Does not require running wire to the fireplace Requires batteries for the receiver and for the handheld remote Operates during power outages
	FRBTC2 Battery Operated Thermostat Remote Control Type: Remote Control Millivolt Control Options Only Turns heater adjusts Thermostat Battery-operated remote control
	FREC Electric On-Off Remote Control with Battery Transmitter Millivolt Control Options Only Remote control with Battery transmitter for Empire remote-ready appliances Easy and convenient to use The receiver must be plugged in.
	FRBTPS Battery Operated Programmable Touch Screen Remote Control Type: Remote Control Millivolt Control Options Only Programmable and easy to use Battery-operated remote control
	FWS1 Fireplace On/Off Switch On-Off wall switch for Empire remote-ready appliances Mounts conveniently on wall
	TMV Wall Thermostat Reed Switch Wall thermostat with reed switch for Empire remote-ready appliances Mounts conveniently on wall
	TRW Wall Thermostat Wireless Remote Wall thermostat with wireless remote for Empire remote-ready appliances Thermostat mounts conveniently on wall

AC/DC Adaptor (*For IP Only) Model: AD1106V Converting power types is a fact of life in some fireplaces, with some electric heating appliances, and with different types of electric fireplace components in general. You can make a common electrical conversion quickly and easily using this Empire 110AC to 6V DC Adaptor. This adaptor is primarily used to convert normal AC outlet power to DC power for fireplace electrics. It's simple, it's easy to use, and it's cost-effective making it a favorite of homeowners in all sorts of ways. 110 AC to 6V DC adaptor

Traditional Log and Ember Bed Kit Model: EK1 Includes: 6 Burnt log pieces, white ash and lava rock. Type: Ember Bed Kit Comes with Traditional Log Burnt Log Pieces, White Ash and Lava Rock Included *This kit is not for use atop a burner.

24 Inch Flexible Stainless Steel Gas Line Model: GF24 Stainless steel flexible gas line 24" length Ideal for the connection of a variety of gas appliances Use to easily connect gas logs to existing fireplace gas connection

2" Riser for 18" Slope Glaze Burner Model: LR18 The log riser adds extra presence to your log set, by raising the set and the burner up 2" from the firebox floor Installs easily on the floor of any vented/vent-free firebox 2-inch Riser Installs easily For use with Empire Slope Glaze Burners Overall Dimensions: 18" (L)

Platinum Glowing Fireplace Embers Model: PE20 Platinum glowing fireplace embers Can be placed directly on the burner Includes approximately 1 gram of ember material For use on burner - Serves 3 to 4 fireplace

Warranty

• All vent-free products carry a five-year limited warranty with a five-year limited labor warranty.
• All remote controls and lighting systems carry a one-year limited warranty.
• Refer to Product Brochure for complete warranty info.

Downloads

• Traditional Vent-Free Log Sets Brochure
• Charred Oak Ceramic Fiber Log Set Manual
• Vent-Free Slope Glaze Burners Manual
• Vent-Free Slope Glaze Burner Variable Flame
• Vent-Free Slope Glaze Burner Intermittent Pilot
• Vented Slope Glaze Burner Millivolt with On/Off Switch Manual
  
  

Videos