Name: Ventis HES350 29" Wood Stove
Availability: OutOfStock

Great reasons to buy from us:

Free Shipping
FREE Shipping on Orders over $199
We will beat any price
110% Price Match Guarantee
Fast Shipping
In Stock Orders Ship in 24-48 hours
Huge Discounts
Up To 20% Off! Don't miss out on this limited time offer!

Ventis HES350 Wood Stove on pedestal is designed to accommodate a large spaces. It has a 3.5 ft³ firebox, which is one of the largest fireboxes for a freestanding wood stove. This unit features non-catalytic combustion technology and will heat up to 2,700 sq. ft. It can handle up to a 22-Inch log and produces up to 110,000 BTUs. It will keep you warm in the winter months with a maximum burn time of 10 hours.

Extra-large wood stove on pedestal
EPA certified at only 1.32 g/h
Solidity and manufacturing quality
C-Cast heat shield added to the firestop
Non-catalytic combustion technology
Installation authorized on the Island of Montreal
Cast iron door
Top heat deflector and side panels

CA Residents: See Prop 65 WARNING.

Appliance Performance

Fuel type	Dry cordwood (16" recommended)
Recommended heating area	1,000 - 2,700 ft²
Overall firebox volume	3.5 ft³
EPA loading volume	2.84 ft³
Maximum burn time	10 hours
Maximum heat output-dry cordwood	110,000 BTU/h
Minimum overall heat output rate	18,100 BTU/h (5.3 kW)
Maximum overall heat output rate	49,500 BTU/h (14.5 kW)
Average efficiency-dry cordwood (HHV)	71 %
Average efficiency-dry cordwood (LHV)	76 %
Optimum efficiency	77 %
Optimum heat transfer efficiency	76 %
Average particulate emission rate	1.32 g/h
Average CO	92 g/h

Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
This appliance is officially tested and certified by an independent agency.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Higher Heating Value of the fuel.
Lower Heating Value of the fuel.
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
Carbon monoxyde.

General Features

Maximum log length	22"
Overall dimension (Width)	28 3/4"
Overall dimension (Height)	34 3/4"
Overall dimension (Depth)	30 5/8"
Alcove installation approved	Yes
Mobile home approved	Yes, with fresh air intake
Premium quality blower included (CFM)	Optional
Certified according to applicable standards	CAN/USA accredited laboratory
Combustion technology	Non-catalytic
Stainless-steel secondary-air system	Yes
Flue outlet diameter	6"
Recommended chimney diameter	6"
Type of chimney	CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height	12'
Door type	Single, glass with cast iron frame
Door opening size (Width)	19"
Door opening size (Height)	9 1/4"
Glass type	Ceramic glass
Glass surface - W x H	18 3/8" x 11 1/2"
Firebox size (Width)	22 7/8"
Firebox size (Height)	12 3/4"
Firebox size (Depth)	20 1/8"
Log positioning	Loading over width and over depth
Firebox lined with refractory bricks	Yes
Baffle type	High quality vermiculite
High-efficiency certified appliance	Yes, EPA 2020 certified
Canadian Standard (emissions)	CSA B415.1-10
USA Standard (emissions)	EPA
Canadian Standard (safety)	ULC S627
USA Standard (safety)	UL 1482, UL 737
Steel thickness-body	3/16"
Steel thickness-top	5/16"

OPTIONS & ACCESSORIES

5" Fresh Air Intake Kit

Material: Steel
Product Type: Outside air kit
Allows outside combustion air to be supplied to the stove
Facilitates a clean transition to the air intake port
Include air intake manifold, gear clamps, and wall register

Rigid Fire Screen

Finish: Black
Enhances crackle of your fire
Removable screen prevents flying sparks
Incomparable atmosphere of a good fire
Use with HES350 Wood Stove

Blower with Variable Speed Control

130 CFM of quiet air output
Allows heater to work more efficiently
Mounting hardware and brackets included
Provides even distribution of heat to the room
Thermal switch controls automatic on/off operation

Click to see Venting Components

DuraVent 4" Length DuraBlack Stovetop Adapter

Use to adapt DuraBlack stovepipe to appliance flue outlets.

DuraVent DBK-DS DuraBlack Damper Section

Install at, or close to, the stove outlet in-line.
5" pipe section with the damper pre-installed.

DuraVent Length DuraBlack Single-Wall Black Pipe

12" / 24" / 48" pipe length.
Use for a single-wall connector pipe.
Requires 18” clearance to combustibles.
Subtract 1 1⁄4” from length to calculate the installed length.

DuraVent DuraBlack 6" Diameter Telescoping Length With Trim

Use for a two-piece installation.
Connects directly from stove to ceiling support box or finishing collar.
Adjusts from 44”- 68”.
No cutting is required.
Available in stainless steel (SS).

DuraVent DuraBlack Slip Connector With Trim

Used to adapt DuraBlack pipe to 6” - 8” Ceiling Support Box, including DuraTech, and DuraPlus.
The Slip connector can also be added to 6” - 8” DuraTech finishing collar.
Adds 3”-13” of length to rigid pipe.
Provides a strong mechanical connection.

DuraVent 45-Degree DuraBlack Elbow

Offsets obstructions as needed.
Elbows angles are now adjustable.
Adjustable elbows are manufactured drip-free so creosote travels back to the stove as intended.

DuraVent 90-Degree DuraBlack Elbow

Offset obstructions as needed or to orient the stovepipe horizontally through the wall installation.
Elbows angles are now adjustable.
Adjustable elbows are manufactured drip-free so creosote travels back to the stove as intended.
Not recommended for rear exit appliances.

DuraVent 6"-8" DuraBlack Slip Increaser With Trim

Use to adapt from 6” DuraBlack to 8” DuraTech, DuraPlus, or DuraLiner at the ceiling support box or finishing collar.
Adds 5" - 15" of length

DuraVent DBK-TC DuraBlack Trim Collar

Use as a decorative Trim Collar for DuraBlack connection to the chimney.

DuraVent DVL Double-Wall Black Stovepipe Adapter

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Connects DVL pipe to the appliance flue outlet.
Use as a stove adapter.

DuraVent DVL Double-Wall Black Adapter/Damper Section

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Connects DVL pipe to the appliance flue outlet.
Use as a stove adapter.

DuraVent 6" DVL Double-Wall Black Stovepipe

6" / 12" / 18" / 24" / 48" pipe length.
Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Designed for installation with minimum clearance to combustibles (6” to walls, 8” from top of horizontal run to ceiling).
Subtract ¾” for installed length.
Constructed with a stainless steel inner wall.

DuraVent 6" DVL Double-Wall Adjustable Black Stovepipe

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Use to add length to DVL pipe.
6” pipe adds 2”-5” of length.

DuraVent 29"-46" DVL Double-Wall Black Stovepipe Telescoping Length

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Use for a two-piece installation from stove to ceiling support box or finishing collar.
No cutting is required.

DuraVent 40"-68" DVL Double-Wall Black Stovepipe Telescoping Length

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Use for a two-piece installation from stove to ceiling support box or finishing collar.
No cutting is required.

DuraVent 45-Degree DVL Double-Wall Black Elbow

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Offsets obstructions as needed.
Elbows angles are adjustable.

DuraVent 90-Degree DVL Double-Wall Black Elbow

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Offsets obstructions as needed.
Elbows angles are adjustable.
Not recommended for rear exit appliances.

DuraVent DVL Double-Wall Black Stovepipe Increaser

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Use to increase from a smaller appliance flue outlet to a larger diameter chimney or stovepipe.

DuraVent DVL/DuraBlack Chimney Adapter With Trim

Diameters 6", 7", and 8"
016” stainless steel inner wall.
018” galvanized outer, painted black
6″ clearance to walls.
8” clearance to ceilings, including cathedral ceilings.
Use to connect from double-wall DVL to DuraTech, DuraPlus, and DuraLiner for a through-the-wall or ceiling support installation.
Provides a strong mechanical connection.

Warranty

Limited lifetime warranty.

Downloads

This Wood Stove is Eligible for the 30% Tax Credit Program

✅76% HHV Efficiency

Beginning in 2023 through December 31, 2032, consumers buying highly efficient wood or pellet stoves or larger residential biomass heating systems may be eligible to claim a 30% tax credit that is capped at $2,000 annually and is based on the full cost (purchase and installation) of the unit.
This new 30 percent tax credit is available for appliances installed between January 1, 2023, and December 31, 2032.
Customers will claim their tax credit when they file their taxes on IRS form 5695 under “Residential Energy Efficient Property Credit “. They will need their purchase receipt (showing the cost of the product and installation).
Customers will also need the manufacturer certificate stating that the stove qualifies for the credit and is at least 75 percent efficient HHV.
The credit applies to qualifying wood and pellet stoves and, unfortunately, not to gas stoves.
People who have zero tax liability may not qualify for the tax credit. It's recommended to consult a qualified tax professional to determine if the customer is eligible to take advantage of this tax credit.

Shipping	This item ships to
Delivery	Estimated between and . Will usually ship within 1 business day.

Description