800-963-5724
Size
Brand
- Sort by Featured
- Sort by Best Selling
- Sort by Alphabetically, A-Z
- Sort by Alphabetically, Z-A
- Sort by Price, low to high
- Sort by Price, high to low
- Sort by Date, new to old
- Sort by Date, old to new
Size
Brand
Electric Patio Heaters
Electric patio heaters: sizing and placement
Electric infrared heaters warm people and surfaces, not the air, so they work in a breeze and under a roof where gas cannot go. Size by area: roughly 2,300 W per 65 sq ft of seating, 4,000 W per 130, 6,000 W per 160. Most residential models run on 240 V; commercial 208 V and 277 V versions are listed with their base model. Mount 7 to 9 ft up and angle toward the seating; controllers and dimmers are sold separately.
Bromic electric models in stock
| Model | Fuel / power | Output | Covers | Mount |
|---|---|---|---|---|
| Platinum Electric 33" · 2300 W | Electric 240 V | 2,300 W (7,900 BTU) | ~65 sq ft | Wall / ceiling |
| Platinum Electric 50" · 3400 W | Electric 240 V | 3,400 W (11,600 BTU) | ~108 sq ft | Wall / ceiling |
| Platinum Electric 53" · 4500 W | Electric 240 V | 4,500 W (15,400 BTU) | ~143 sq ft | Wall / ceiling |
| Tungsten Electric 2000 W | Electric 240 V | 2,000 W | ~65 sq ft | Wall / ceiling |
| Tungsten Electric 44" · 4000 W | Electric 240 V | 4,000 W (13,700 BTU) | ~130 sq ft | Wall / ceiling |
| Tungsten Electric 56" · 6000 W | Electric 277 V (208 V available) | 6,000 W (20,500 BTU) | ~160 sq ft | Wall / ceiling |
| Cobalt Electric 44" · 4000 W | Electric 240 V | 4,000 W (13,700 BTU) | ~160 sq ft | Wall / ceiling |
| Cobalt Electric 56" · 6000 W | Electric 240 V | 6,000 W (20,500 BTU) | ~160 sq ft | Wall / ceiling |
| Eclipse Pendant · 2900 W | Electric 240 V | 2,900 W | ~121 sq ft | Ceiling pendant |
| Eclipse Portable · 2900 W | Electric 240 V | 2,900 W | ~121 sq ft | Freestanding |
See also gas patio heaters for open terraces, and all Bromic heaters.
Authorized Dealer · Full manufacturer warranty · Free shipping over $299 · Expert sizing support · Price match available
Electric Patio Heaters — Quiet, Clean, Covered-Patio Safe
Electric infrared patio heaters are the top choice for covered patios, sunrooms, and enclosed outdoor spaces. They deliver instant radiant warmth with no fumes, no gas line, no flame — just plug-in or hardwire and run. Fireplace Choice carries premium electric patio heaters from Bromic, Dimplex, Schwank, and SunStar, with output from 2,000W (small patios) up to 6,000W (large covered areas, commercial).
Electric Patio Heater Buying Guide
- Coverage: 2,300W covers 100–150 sq ft; 4,500W covers 200–250 sq ft; 6,000W covers 250+ sq ft.
- Installation: Most models are hardwired on a 208–240V dedicated circuit. Plug-in portables (Bromic Eclipse) require only a grounded outlet.
- Operating cost: ~$0.15–$0.60 per hour — far lower than gas.
- Best for: Covered patios, pergolas, restaurants, pool decks, sunrooms.
Frequently Asked Questions
Are electric patio heaters safe under a covered patio?
Yes — electric infrared heaters are specifically designed for covered patios and can be safely ceiling- or wall-mounted following manufacturer clearance specs. They produce no fumes, making them the safest choice for enclosed spaces.
How much does it cost to run an electric patio heater?
Roughly $0.15 to $0.60 per hour depending on wattage and local electricity rates. A 2,300W heater at $0.15/kWh costs about $0.35 per hour to run — significantly cheaper than gas patio heaters.
What wattage electric patio heater do I need?
For covered patios: 2,000–2,300W for 100–150 sq ft; 4,000–4,500W for 200–250 sq ft; 6,000W for 250+ sq ft. Increase capacity for cold climates or semi-open areas.
Do electric patio heaters work in cold weather?
Yes — infrared radiant heat warms people and objects directly (not the air), so it works effectively even in cold outdoor temperatures. Coverage area may need to increase in very cold climates.
Do I need an electrician to install an electric patio heater?
Most hardwired models (Bromic Platinum, Tungsten, Dimplex DIR) require a licensed electrician for a dedicated 208–240V circuit. Plug-in portables (Bromic Eclipse portable) do not.
